If you ride a Harley Touring model — Road King, Street Glide, Electra Glide, Ultra Classic, or any FLH model — you know exactly what the “pucker” feels like.

You deploy the jiffy stand, dismount the bike… and for that split second it feels like the whole thing is going to keep rolling forward. Your stomach tightens, your butthole puckers, and you instinctively grab the handlebars.

It happens on flat ground, slight inclines, even in your own driveway.
And it happens way more often than it should.

You’re not imagining it. It’s a real design quirk on most FLH and rubber-mount Touring bikes.

The good news?

There’s a simple, affordable fix that thousands of riders swear by.

Why Does the Harley Jiffy Stand Roll Forward?

Harley’s factory jiffy stand has a stop on the leg that drops into a notch on the kickstand mount.

On FLH models (and most modern Touring bikes), the square end the OEM stop is mounted to is 13mm wide. There’s just enough play in the mechanism for the stand to move forward a little once the bike’s full weight is on it.

This tiny bit of movement creates that unsettling forward creep. Riders on forums like HDForums have been complaining about it for years — calling it the “pucker factor,” “kickstand creep,” or “that stomach-drop feeling.”

It’s especially noticeable on:

• Road King (FLHR)
• Street Glide (FLHX)
• Electra Glide (FLHT / FLHTC)
• Ultra Classic (FLHTCU)
• Most rubber-mount Touring models from the mid-1980s to today

Common “Fixes” That Don’t Actually Fix It

• Tightening the pivot bolt → Makes it harder to deploy, but doesn’t stop the creep
• Adding a spring or extension → Changes the angle but doesn’t lock the leg in place
• Kickstand pads or pucks → Help with ground clearance, not forward movement
• Parking in gear or on the side → Workarounds, not solutions

None of them address the root cause: the stand leg needs a solid, offset stop to eliminate that play.

The Real Solution: PuckerStop is a precision laser cut, chrome jiffy stand leg stop (also called a “thumb stop”) designed specifically for Harley FLH and compatible Touring models with the standard 13mm square seat.

Here’s what it does:

• The innovative design catches the stand leg earlier and more securely
• It eliminates forward creep and that dreaded pucker moment
• Installs in about 5-10 minutes with basic tools
• Looks like a OEM Harley part — clean, polished chrome

Perfect Fit For:

• All FLH Touring models (Road King, Street Glide, Electra Glide, Ultra, etc.)
• Most Harley Touring bikes from the mid-1980s to current models

Important Note: It is not designed for early FLT Tour Glide models that have the narrower 12mm square seat . If you’re unsure about your year/model, check with your Harley-Davidson dealer before ordering.

Real Riders Are Loving It

“I’ve had that pucker moment one too many times.
Installed the PuckerStop and it’s night and day. Bike feels rock solid now.”
— Road Glide owner on HDForums

“Best $25 I’ve ever spent on my Harley.
No more worrying when I park it.”
— Street Glide rider

Thousands of Harley owners now ride with total confidence because of this little piece.

Easy Installation

1. Drop the jiffy stand
2. Remove the existing OEM stop
3. Bolt on the PuckerStop using the supplied hardware
4. Done. No drilling, no modifications.

(Full step-by-step instructions come with every order.)

Why Choose PuckerStop?

• Harley-specific engineering — not a generic universal part
• Proven offset design that actually stops the movement
• Only $24.95 — cheaper than a tank of gas
• 100% satisfaction guarantee

Ready to Stop the Pucker for Good?

Don’t let that BUTT PUCKER ruin another parking moment.

Grab a PuckerStop today and ride with total confidence knowing your Harley will stay exactly where you parked it.
Buy PuckerStop Now for $24.95

Ride safe, ride confident, and keep your pucker where it belongs — relaxed.